color problems

[J. Landman Gay]

On 7/28/03 11:35 AM, tech at paynesparkman.com wrote:

> I've tried both of the following commands: 
> 
> "set the foregroundcolor of image "W31" to 255,0,0" or "set the foregroundcolor of image "W31" to "red""
> 
> on Win 2k with engine 2.4.3 to change an images color to red but, it turns blue instead.  When I check the properties, everything indicates that it's red.  If I switch to another 
> card then back, it will now appear red as it's supposed to.  If I try to set the color to blue, it turns red despite all properties saying red.  If I switch to another card and back it will 
> now appear blue.  Anybody seen this?  Know any workarounds?  Thanks

There is a missing quotation mark in front of the RGB value, and a 
double quoatation mark at the end of the word "red". Probably this is 
just a typo, but if you did copy/paste the commands into the email then 
check to make sure the values are properly quoted.

I've never seen anything like you describe, by the way, so there must be 
something else going on.

-- 
Jacqueline Landman Gay         |     jacque at hyperactivesw.com
HyperActive Software           |     http://www.hyperactivesw.com