color problems

[tech at paynesparkman.com]

Thanks Jaqueline and Ray.  It looks like it was specific to my computer.  I tried it on a Win95 PC and it worked as it should.  I came back to mine and changed the color 
setting from True Color (32 bit) to High Color (16 bit) and my problem was magically solved.  Does this make sense?  I should mention that my screen area is set to 1600 x 
1200.  I'm wondering if this was causing another flaky, intermittent graphic problem I was having...... 

>> I've tried both of the following commands: 
>> 
>> "set the foregroundcolor of image "W31" to 255,0,0" or "set the foregroundcolor of image "W31" to "red""
>> 
>> on Win 2k with engine 2.4.3 to change an images color to red but, it turns blue instead.  When I check the properties, everything indicates that it's red.  If I switch to another 
>> card then back, it will now appear red as it's supposed to.  If I try to set the color to blue, it turns red despite all properties saying red.  If I switch to another card and back it 
will 
>> now appear blue.  Anybody seen this?  Know any workarounds?  Thanks
>
>There is a missing quotation mark in front of the RGB value, and a 
>double quoatation mark at the end of the word "red". Probably this is 
>just a typo, but if you did copy/paste the commands into the email then 
>check to make sure the values are properly quoted.
>
>I've never seen anything like you describe, by the way, so there must be 
>something else going on.