Teleo from makingthings.com

[Sarah Reichelt]

Hi Liam,

Yes, I have only used them with Mac OS X. You need a USB-serial
adapter, preferably one with a D9 connector. I use an EasySync FTDI
adapter for this and it works fine. There is a Serial test stack on my
web site that allows you to test sending & receiving the commands:
<http://www.troz.net/Rev/tutorials/SerialTest.rev.gz>

Cheers,
Sarah

On 9/23/05, liamlambert <liamlambert at mac.com> wrote:
> Sarah thanks for your reply Does weeder devices work with mac's (osx)
> Liam
>
> On 9/15/05, liamlambert <liamlambert at mac.com> wrote:
>  > Has anyone use rev with teleo from makingthings.com I am looking for
>  > a stack that will connect to there starter kit and read a single
>  > Digital in put
>  >   Liam . L
>
> Unfortunately, Telo uses a USB interface and Revolution currently has
> no mechanism for reading & writing to a USB port directly, although I
> understand that Altuit are working on an external to do this. However
> Rev can write to a serial port or to a USB-serial adapter to you might
> find these Weeder devices useful <http://www.weedtech.com/>. I have
> successfully used the Digital I/O, Analog Input & Thermocouple Input
> modules with a Revolution program.
>
> Cheers,
> Sarah