Remember the NSProgressIndicator OS X?

[Wouter]

Weird difference between mc and rev!
For the rev users add the extra line in the following handler:

> on prepArray  tG,tK
>   if there is no grp "runningStarX" then goCreateSome
>   put item 1 of Cp into tX
>   put item 2 of Cp into tY
>   put (2 * pi / 12) into sRad
>   repeat with i = 1 to 12
>     put trunc(tG * cos (sRad * i)) + tX into a
>     put trunc(tG * sin (sRad * i)) + tY into b
>     put trunc(tK * cos (sRad * i)) + tX into c
>     put trunc(tK * sin (sRad * i)) + tY into d
>     put quote & a,b & quote && "& cr &" & quote& c,d & quote into 
> aTemp[i]
>   end repeat
>   repeat with j = 1 to 12
>     repeat with i = 1 to 6
>       put cStar & i into tStar
>       put j - i  + 1 into x
>       if x <= 0 then add 12 to x
>       put "set the points of" && the name of tStar && "to" && aTemp[x] 
> after  aPoints[j]
>     end repeat
>     if j <> 1 then put  "& cr & cr &" & aTemp[j]   after aTemp[0]
>     else put aTemp[j]   after aTemp[0]
>   end repeat

put  "& cr & cr" after aTemp[0]

>   put cStar& "7" into tStar
>   put "set the points of" && the name of tStar && "to" && aTemp[0]  & 
> cr  into aPoints[0]
> end prepArray


The difference between mc and rev if the extra line is not added:
     -  in rev there is an extra line at 3 o'clock in the runningStarX7 
graphic
where there is none in mc, though both use the same engine!!
(enlarge the runningStarX7 graphic to see this difference)

How come????

Greetings,
WA