From bobsneidar at iotecdigital.com  Fri May  9 13:13:34 2025
From: bobsneidar at iotecdigital.com (Bob Sneidar)
Date: Fri, 9 May 2025 17:13:34 +0000
Subject: Standalone Version
Message-ID: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>

Hi all. 

This has probably been asked before. I have a request to include the standalone version of an application in the About splash screen. I would like to access the value from the Standalone Settings, either when building the app or after it’s done, but I can’t find a function for that. 

Bob S


From tom at makeshyft.com  Tue May 13 00:28:31 2025
From: tom at makeshyft.com (Tom Glod)
Date: Tue, 13 May 2025 00:28:31 -0400
Subject: Standalone Version
In-Reply-To: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>
References: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>
Message-ID: 
 <CAPzQJLKoYLFHPFiSx7B3QK0Ap3XFA6s-x2wW58OdLxyg9w0uhw@mail.gmail.com>

Hey Bob, your message came in baseencoded.

On Fri, May 9, 2025 at 1:15 PM Bob Sneidar via use-livecode <
use-livecode at lists.runrev.com> wrote:

>
> SGkgYWxsLiANCg0KVGhpcyBoYXMgcHJvYmFibHkgYmVlbiBhc2tlZCBiZWZvcmUuIEkgaGF2ZSBh
>
> IHJlcXVlc3QgdG8gaW5jbHVkZSB0aGUgc3RhbmRhbG9uZSB2ZXJzaW9uIG9mIGFuIGFwcGxpY2F0
>
> aW9uIGluIHRoZSBBYm91dCBzcGxhc2ggc2NyZWVuLiBJIHdvdWxkIGxpa2UgdG8gYWNjZXNzIHRo
>
> ZSB2YWx1ZSBmcm9tIHRoZSBTdGFuZGFsb25lIFNldHRpbmdzLCBlaXRoZXIgd2hlbiBidWlsZGlu
>
> ZyB0aGUgYXBwIG9yIGFmdGVyIGl04oCZcyBkb25lLCBidXQgSSBjYW7igJl0IGZpbmQgYSBmdW5j
> dGlvbiBmb3IgdGhhdC4gDQoNCkJvYiBTDQoNCg==
>
> _______________________________________________
> use-livecode mailing list
> use-livecode at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>

From bobsneidar at iotecdigital.com  Tue May 13 11:30:27 2025
From: bobsneidar at iotecdigital.com (Bob Sneidar)
Date: Tue, 13 May 2025 15:30:27 +0000
Subject: Standalone Version
In-Reply-To: 
 <CAPzQJLKoYLFHPFiSx7B3QK0Ap3XFA6s-x2wW58OdLxyg9w0uhw@mail.gmail.com>
References: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>
 <CAPzQJLKoYLFHPFiSx7B3QK0Ap3XFA6s-x2wW58OdLxyg9w0uhw@mail.gmail.com>
Message-ID: <8D495214-054C-46CB-A61F-602238DABB86@iotecdigital.com>

I know. I just gave up when I saw that. This list is nearly unusable. 

Bob S


> On May 12, 2025, at 9:28 PM, Tom Glod via use-livecode <use-livecode at lists.runrev.com> wrote:
> 
> Hey Bob, your message came in baseencoded.
> 
> On Fri, May 9, 2025 at 1:15=E2=80=AFPM Bob Sneidar via use-livecode <
> use-livecode at lists.runrev.com> wrote:
> 
>> 
>> SGkgYWxsLiANCg0KVGhpcyBoYXMgcHJvYmFibHkgYmVlbiBhc2tlZCBiZWZvcmUuIEkgaGF2Z=
> SBh
>> 
>> IHJlcXVlc3QgdG8gaW5jbHVkZSB0aGUgc3RhbmRhbG9uZSB2ZXJzaW9uIG9mIGFuIGFwcGxpY=
> 2F0
>> 
>> aW9uIGluIHRoZSBBYm91dCBzcGxhc2ggc2NyZWVuLiBJIHdvdWxkIGxpa2UgdG8gYWNjZXNzI=
> HRo
>> 
>> ZSB2YWx1ZSBmcm9tIHRoZSBTdGFuZGFsb25lIFNldHRpbmdzLCBlaXRoZXIgd2hlbiBidWlsZ=
> Glu
>> 
>> ZyB0aGUgYXBwIG9yIGFmdGVyIGl04oCZcyBkb25lLCBidXQgSSBjYW7igJl0IGZpbmQgYSBmd=
> W5j
>> dGlvbiBmb3IgdGhhdC4gDQoNCkJvYiBTDQoNCg=3D=3D
>> 
>> _______________________________________________
>> use-livecode mailing list
>> use-livecode at lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your
>> subscription preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> 
> _______________________________________________
> use-livecode mailing list
> use-livecode at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


From jacque at hyperactivesw.com  Tue May 13 12:48:19 2025
From: jacque at hyperactivesw.com (J. Landman Gay)
Date: Tue, 13 May 2025 11:48:19 -0500
Subject: Standalone Version
In-Reply-To: <8D495214-054C-46CB-A61F-602238DABB86@iotecdigital.com>
References: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>
 <CAPzQJLKoYLFHPFiSx7B3QK0Ap3XFA6s-x2wW58OdLxyg9w0uhw@mail.gmail.com>
 <8D495214-054C-46CB-A61F-602238DABB86@iotecdigital.com>
Message-ID: 
 <196ca8c1038.2812.5e131b4e58299f54a9f0b9c05d4f07f9@hyperactivesw.com>

Odd that your latest post came through fine. Did you do something different 
this time?

--
Jacqueline Landman Gay | jacque at hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com
On May 13, 2025 10:33:10 AM Bob Sneidar via use-livecode 
<use-livecode at lists.runrev.com> wrote:

> I know. I just gave up when I saw that. This list is nearly unusable.=20
>
> Bob S
>
>
>> On May 12, 2025, at 9:28 PM, Tom Glod via use-livecode <use-livecode at list=
> s.runrev.com> wrote:
>> =20
>> Hey Bob, your message came in baseencoded.
>> =20
>> On Fri, May 9, 2025 at 1:15=3DE2=3D80=3DAFPM Bob Sneidar via use-livecode=
> <
>> use-livecode at lists.runrev.com> wrote:
>> =20
>>> =20
>>> SGkgYWxsLiANCg0KVGhpcyBoYXMgcHJvYmFibHkgYmVlbiBhc2tlZCBiZWZvcmUuIEkgaGF2=
> Z=3D
>> SBh
>>> =20
>>> IHJlcXVlc3QgdG8gaW5jbHVkZSB0aGUgc3RhbmRhbG9uZSB2ZXJzaW9uIG9mIGFuIGFwcGxp=
> Y=3D
>> 2F0
>>> =20
>>> aW9uIGluIHRoZSBBYm91dCBzcGxhc2ggc2NyZWVuLiBJIHdvdWxkIGxpa2UgdG8gYWNjZXNz=
> I=3D
>> HRo
>>> =20
>>> ZSB2YWx1ZSBmcm9tIHRoZSBTdGFuZGFsb25lIFNldHRpbmdzLCBlaXRoZXIgd2hlbiBidWls=
> Z=3D
>> Glu
>>> =20
>>> ZyB0aGUgYXBwIG9yIGFmdGVyIGl04oCZcyBkb25lLCBidXQgSSBjYW7igJl0IGZpbmQgYSBm=
> d=3D
>> W5j
>>> dGlvbiBmb3IgdGhhdC4gDQoNCkJvYiBTDQoNCg=3D3D=3D3D
>>> =20
>>> _______________________________________________
>>> use-livecode mailing list
>>> use-livecode at lists.runrev.com
>>> Please visit this url to subscribe, unsubscribe and manage your
>>> subscription preferences:
>>> http://lists.runrev.com/mailman/listinfo/use-livecode
>>> =20
>> _______________________________________________
>> use-livecode mailing list
>> use-livecode at lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your subscript=
> ion preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
>
>
> _______________________________________________
> use-livecode mailing list
> use-livecode at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your 
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode




From bobsneidar at iotecdigital.com  Tue May 13 12:54:37 2025
From: bobsneidar at iotecdigital.com (Bob Sneidar)
Date: Tue, 13 May 2025 16:54:37 +0000
Subject: Standalone Version
In-Reply-To: 
 <196ca8c1038.2812.5e131b4e58299f54a9f0b9c05d4f07f9@hyperactivesw.com>
References: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>
 <CAPzQJLKoYLFHPFiSx7B3QK0Ap3XFA6s-x2wW58OdLxyg9w0uhw@mail.gmail.com>
 <8D495214-054C-46CB-A61F-602238DABB86@iotecdigital.com>
 <196ca8c1038.2812.5e131b4e58299f54a9f0b9c05d4f07f9@hyperactivesw.com>
Message-ID: <92355148-3243-4395-B783-7454419899F8@iotecdigital.com>

No it’s random. Not sure what triggers it if anything.

Bob S


On May 13, 2025, at 9:48 AM, J. Landman Gay via use-livecode <use-livecode at lists.runrev.com> wrote:

Odd that your latest post came through fine. Did you do something different this time?

--
Jacqueline Landman Gay | jacque at hyperactivesw.com<mailto:jacque at hyperactivesw.com>
HyperActive Software | http://www.hyperactivesw.com<http://www.hyperactivesw.com/>
On May 13, 2025 10:33:10 AM Bob Sneidar via use-livecode <use-livecode at lists.runrev.com<mailto:use-livecode at lists.runrev.com>> wrote:

I know. I just gave up when I saw that. This list is nearly unusable.=20

Bob S


On May 12, 2025, at 9:28 PM, Tom Glod via use-livecode <use-livecode at list=
s.runrev.com<http://s.runrev.com/>> wrote:
=20
Hey Bob, your message came in baseencoded.


From bobsneidar at iotecdigital.com  Tue May 13 12:56:04 2025
From: bobsneidar at iotecdigital.com (Bob Sneidar)
Date: Tue, 13 May 2025 16:56:04 +0000
Subject: Standalone Version
In-Reply-To: 
 <196ca8c1038.2812.5e131b4e58299f54a9f0b9c05d4f07f9@hyperactivesw.com>
References: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>
 <CAPzQJLKoYLFHPFiSx7B3QK0Ap3XFA6s-x2wW58OdLxyg9w0uhw@mail.gmail.com>
 <8D495214-054C-46CB-A61F-602238DABB86@iotecdigital.com>
 <196ca8c1038.2812.5e131b4e58299f54a9f0b9c05d4f07f9@hyperactivesw.com>
Message-ID: <1A2A70ED-044F-49AC-9C62-E0285D097EDD@iotecdigital.com>

My question was about a group with a scrollbar. The mouse scroll wheel does not seem to interact with the group object. I can’t scroll that way.

Bob S


On May 13, 2025, at 9:48 AM, J. Landman Gay via use-livecode <use-livecode at lists.runrev.com> wrote:

Odd that your latest post came through fine. Did you do something different this time?

--
Jacqueline Landman Gay | jacque at hyperactivesw.com<mailto:jacque at hyperactivesw.com>
HyperActive Software | http://www.hyperactivesw.com<http://www.hyperactivesw.com/>
On May 13, 2025 10:33:10 AM Bob Sneidar via use-livecode <use-livecode at lists.runrev.com<mailto:use-livecode at lists.runrev.com>> wrote:

I know. I just gave up when I saw that. This list is nearly unusable.=20

Bob S


On May 12, 2025, at 9:28 PM, Tom Glod via use-livecode <use-livecode at list=
s.runrev.com<http://s.runrev.com/>> wrote:
=20
Hey Bob, your message came in baseencoded.


From stephen at barncard.com  Tue May 13 17:05:34 2025
From: stephen at barncard.com (Stephen Barncard)
Date: Tue, 13 May 2025 14:05:34 -0700
Subject: Standalone Version
In-Reply-To: <1A2A70ED-044F-49AC-9C62-E0285D097EDD@iotecdigital.com>
References: <FA532007-CEE0-477A-9CA5-6247BE158931@iotecdigital.com>
 <CAPzQJLKoYLFHPFiSx7B3QK0Ap3XFA6s-x2wW58OdLxyg9w0uhw@mail.gmail.com>
 <8D495214-054C-46CB-A61F-602238DABB86@iotecdigital.com>
 <196ca8c1038.2812.5e131b4e58299f54a9f0b9c05d4f07f9@hyperactivesw.com>
 <1A2A70ED-044F-49AC-9C62-E0285D097EDD@iotecdigital.com>
Message-ID: 
 <CAFmQfH+R+h49yDoz_pAn4B+OB5KnAFQuxew=1VK5JKqm1GoEEA@mail.gmail.com>

Obviously, a major malfunction

--
Stephen Barncard - Sebastopol Ca. USA -
mixstream.org


On Tue, May 13, 2025 at 09:57 Bob Sneidar via use-livecode <
use-livecode at lists.runrev.com> wrote:

>
> TXkgcXVlc3Rpb24gd2FzIGFib3V0IGEgZ3JvdXAgd2l0aCBhIHNjcm9sbGJhci4gVGhlIG1vdXNl
>
> IHNjcm9sbCB3aGVlbCBkb2VzIG5vdCBzZWVtIHRvIGludGVyYWN0IHdpdGggdGhlIGdyb3VwIG9i
>
> amVjdC4gSSBjYW7igJl0IHNjcm9sbCB0aGF0IHdheS4NCg0KQm9iIFMNCg0KDQpPbiBNYXkgMTMs
>
> IDIwMjUsIGF0IDk6NDggQU0sIEouIExhbmRtYW4gR2F5IHZpYSB1c2UtbGl2ZWNvZGUgPHVzZS1s
>
> aXZlY29kZUBsaXN0cy5ydW5yZXYuY29tPiB3cm90ZToNCg0KT2RkIHRoYXQgeW91ciBsYXRlc3Qg
>
> cG9zdCBjYW1lIHRocm91Z2ggZmluZS4gRGlkIHlvdSBkbyBzb21ldGhpbmcgZGlmZmVyZW50IHRo
>
> aXMgdGltZT8NCg0KLS0NCkphY3F1ZWxpbmUgTGFuZG1hbiBHYXkgfCBqYWNxdWVAaHlwZXJhY3Rp
>
> dmVzdy5jb208bWFpbHRvOmphY3F1ZUBoeXBlcmFjdGl2ZXN3LmNvbT4NCkh5cGVyQWN0aXZlIFNv
>
> ZnR3YXJlIHwgaHR0cDovL3d3dy5oeXBlcmFjdGl2ZXN3LmNvbTxodHRwOi8vd3d3Lmh5cGVyYWN0
>
> aXZlc3cuY29tLz4NCk9uIE1heSAxMywgMjAyNSAxMDozMzoxMCBBTSBCb2IgU25laWRhciB2aWEg
>
> dXNlLWxpdmVjb2RlIDx1c2UtbGl2ZWNvZGVAbGlzdHMucnVucmV2LmNvbTxtYWlsdG86dXNlLWxp
>
> dmVjb2RlQGxpc3RzLnJ1bnJldi5jb20+PiB3cm90ZToNCg0KSSBrbm93LiBJIGp1c3QgZ2F2ZSB1
>
> cCB3aGVuIEkgc2F3IHRoYXQuIFRoaXMgbGlzdCBpcyBuZWFybHkgdW51c2FibGUuPTIwDQoNCkJv
>
> YiBTDQoNCg0KT24gTWF5IDEyLCAyMDI1LCBhdCA5OjI4IFBNLCBUb20gR2xvZCB2aWEgdXNlLWxp
>
> dmVjb2RlIDx1c2UtbGl2ZWNvZGVAbGlzdD0NCnMucnVucmV2LmNvbTxodHRwOi8vcy5ydW5yZXYu
>
> Y29tLz4+IHdyb3RlOg0KPTIwDQpIZXkgQm9iLCB5b3VyIG1lc3NhZ2UgY2FtZSBpbiBiYXNlZW5j
> b2RlZC4NCg0K
> _______________________________________________
> use-livecode mailing list
> use-livecode at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>

From andrew at midwestcoastmedia.com  Wed May 14 09:36:01 2025
From: andrew at midwestcoastmedia.com (Andrew at MWCM)
Date: Wed, 14 May 2025 09:36:01 -0400
Subject: Standalone Version
In-Reply-To: <mailman.1.1746892801.2322377.use-livecode@lists.runrev.com>
References: <mailman.1.1746892801.2322377.use-livecode@lists.runrev.com>
Message-ID: <DC1725AA-9F95-4E9B-9682-E73D5B34B854@midwestcoastmedia.com>

> 
> Date: Fri, 9 May 2025 17:13:34 +0000
> From: Bob Sneidar <bobsneidar at iotecdigital.com>
> To: How to use LiveCode <use-livecode at lists.runrev.com>
> Subject: Standalone Version
> Message-ID: <FA532007-CEE0-477A-9CA5-6247BE158931 at iotecdigital.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Hi all. 
> 
> This has probably been asked before. I have a request to include the standalone version of an application in the About splash screen. I would like to access the value from the Standalone Settings, either when building the app or after it’s done, but I can’t find a function for that. 
> 
> Bob S
> 

You are referencing the cRevStandaloneSettings. Here is a preOpenStack snippet that I use in a project:

switch the platform
   case "iphone"
      put ("IU McKinney CLE app v" & the cRevStandaloneSettings["ios,bundle version"] of this stack) into field "versionField" of card "splash"
      break
   case "Win32"
      put ("IU McKinney CLE app v" & the cRevStandaloneSettings["Windows,productversion1"] of this stack) into field "versionField" of card "splash"
      break
   case "MacOS"
      put ("IU McKinney CLE app v" & the cRevStandaloneSettings["OSX,shortVersion"] of this stack) into field "versionField" of card "splash"
      break
end switch 


Here is a reference to the available settings: https://forums.livecode.com/viewtopic.php?t=19253

—Andrew Bell

From marksmithhfx at gmail.com  Wed May 14 12:31:00 2025
From: marksmithhfx at gmail.com (Mark Smith)
Date: Wed, 14 May 2025 17:31:00 +0100
Subject: Standalone Version
In-Reply-To: <DC1725AA-9F95-4E9B-9682-E73D5B34B854@midwestcoastmedia.com>
References: <mailman.1.1746892801.2322377.use-livecode@lists.runrev.com>
 <DC1725AA-9F95-4E9B-9682-E73D5B34B854@midwestcoastmedia.com>
Message-ID: <A0562852-DC25-406A-92CB-617D7519AA0E@gmail.com>

Thanks Andrew. I get this message when clicking on your link: The requested topic does not exist.

> On 14 May 2025, at 2:36 pm, Andrew at MWCM via use-livecode <use-livecode at lists.runrev.com> wrote:
> 
>> =20
>> Date: Fri, 9 May 2025 17:13:34 +0000
>> From: Bob Sneidar <bobsneidar at iotecdigital.com>
>> To: How to use LiveCode <use-livecode at lists.runrev.com>
>> Subject: Standalone Version
>> Message-ID: <FA532007-CEE0-477A-9CA5-6247BE158931 at iotecdigital.com>
>> Content-Type: text/plain; charset=3D"utf-8"
>> =20
>> Hi all.=20
>> =20
>> This has probably been asked before. I have a request to include the =
> standalone version of an application in the About splash screen. I would =
> like to access the value from the Standalone Settings, either when =
> building the app or after it=E2=80=99s done, but I can=E2=80=99t find a =
> function for that.=20
>> =20
>> Bob S
>> =20
> 
> You are referencing the cRevStandaloneSettings. Here is a preOpenStack =
> snippet that I use in a project:
> 
> switch the platform
>   case "iphone"
>      put ("IU McKinney CLE app v" & the =
> cRevStandaloneSettings["ios,bundle version"] of this stack) into field =
> "versionField" of card "splash"
>      break
>   case "Win32"
>      put ("IU McKinney CLE app v" & the =
> cRevStandaloneSettings["Windows,productversion1"] of this stack) into =
> field "versionField" of card "splash"
>      break
>   case "MacOS"
>      put ("IU McKinney CLE app v" & the =
> cRevStandaloneSettings["OSX,shortVersion"] of this stack) into field =
> "versionField" of card "splash"
>      break
> end switch=20
> 
> 
> Here is a reference to the available settings: =
> https://forums.livecode.com/viewtopic.php?t=3D19253
> 
> =E2=80=94Andrew Bell=
> 
> _______________________________________________
> use-livecode mailing list
> use-livecode at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode

From bobsneidar at iotecdigital.com  Wed May 14 14:20:58 2025
From: bobsneidar at iotecdigital.com (Bob Sneidar)
Date: Wed, 14 May 2025 18:20:58 +0000
Subject: Standalone Version
In-Reply-To: <DC1725AA-9F95-4E9B-9682-E73D5B34B854@midwestcoastmedia.com>
References: <mailman.1.1746892801.2322377.use-livecode@lists.runrev.com>
 <DC1725AA-9F95-4E9B-9682-E73D5B34B854@midwestcoastmedia.com>
Message-ID: <28DE9DED-2781-4515-8DAB-C1B53135E490@iotecdigital.com>

Thank you!

Bob S


> On May 14, 2025, at 6:36 AM, Andrew at MWCM via use-livecode <use-livecode at lists.runrev.com> wrote:
> 
>> =20
>> Date: Fri, 9 May 2025 17:13:34 +0000
>> From: Bob Sneidar <bobsneidar at iotecdigital.com>
>> To: How to use LiveCode <use-livecode at lists.runrev.com>
>> Subject: Standalone Version
>> Message-ID: <FA532007-CEE0-477A-9CA5-6247BE158931 at iotecdigital.com>
>> Content-Type: text/plain; charset=3D"utf-8"
>> =20
>> Hi all.=20
>> =20
>> This has probably been asked before. I have a request to include the =
> standalone version of an application in the About splash screen. I would =
> like to access the value from the Standalone Settings, either when =
> building the app or after it=E2=80=99s done, but I can=E2=80=99t find a =
> function for that.=20
>> =20
>> Bob S
>> =20
> 
> You are referencing the cRevStandaloneSettings. Here is a preOpenStack =
> snippet that I use in a project:
> 
> switch the platform
>   case "iphone"
>      put ("IU McKinney CLE app v" & the =
> cRevStandaloneSettings["ios,bundle version"] of this stack) into field =
> "versionField" of card "splash"
>      break
>   case "Win32"
>      put ("IU McKinney CLE app v" & the =
> cRevStandaloneSettings["Windows,productversion1"] of this stack) into =
> field "versionField" of card "splash"
>      break
>   case "MacOS"
>      put ("IU McKinney CLE app v" & the =
> cRevStandaloneSettings["OSX,shortVersion"] of this stack) into field =
> "versionField" of card "splash"
>      break
> end switch=20
> 
> 
> Here is a reference to the available settings: =
> https://forums.livecode.com/viewtopic.php?t=3D19253
> 
> =E2=80=94Andrew Bell=
> 
> _______________________________________________
> use-livecode mailing list
> use-livecode at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode