Help! I'm stuck

William Prothero waprothero at gmail.com
Sat Apr 3 20:10:36 EDT 2021


Matthias, or anybody:

I got side-tracked but am back to needing to build this standalone and guess what the error message from the builder means. This build problem has been known for some time, as Matthias kindly notified me.

My question is:Is it possible to tell what stacks are causing the problem, from the builder error codes. I have But it seems a bit odd that I would have to disable the preopenStack, openstack, closestack, preopencard, opencard, etc, etc ad-nauseum.

Before I cause myself a bunch of thrashing around changing a bunch of stacks, is there anything in the error dialog that’s attached that would give me a hint as to where this is happening? Also, I wonder if disabling all these open …. handlers during build might cause build problems. If it was a universal problem/bug, I would think it would have been fixed by LC version 9.6.2 (RC3).???

Thanks for any insight and direction. (I”m on Big Sur 11.2.2). I have 10 stacks and a number of script only lib stacks in this project.

Bill

Links to the error dialog:
page 1: https://www.dropbox.com/s/f4bmxx3zkuoy0zq/ErrorWindow-p1.png?dl=0 <https://www.dropbox.com/s/f4bmxx3zkuoy0zq/ErrorWindow-p1.png?dl=0>
page 2: https://www.dropbox.com/s/zc18s3gkzv92w2w/Errors-page-2.pdf?dl=0 <https://www.dropbox.com/s/zc18s3gkzv92w2w/Errors-page-2.pdf?dl=0>

> On Mar 20, 2021, at 1:38 PM, matthias rebbe via use-livecode <use-livecode at lists.runrev.com> wrote:
> 
> Bill,
> 
> i've just checked the release notes of 9.0.x
> The release notes of 9.0.2 contain updated information about this topic and an enhanced script example. 
> opencard scripts should also be adjusted.
> https://downloads.livecode.com/livecode/9_0_2/LiveCodeNotes-9_0_2.pdf
> 
> Please excuse me for pointing to 9.0.1rc1 release notes yesterday.
> 
> 
> Regards
> Matthias
> 
> 
> 
> 
> 
> 
> -
> Matthias Rebbe
> Life Is Too Short For Boring Code
> 
>> Am 20.03.2021 um 18:22 schrieb William Prothero via use-livecode <use-livecode at lists.runrev.com>:
>> 
>> Matthias:
>> I see that openstack and closestack messages are inhibited during application build, using:
>> 
>> on closeStack
>> 	if the mode of stack “revStandaloneProgress” > 0 then
>> 		exit closeStack
>> 	end if
>> end
>> 
>> So, before I start adding this to all openstack, closestack, scripts of my 12 stacks, I'm’ wondering if I could mess up the build process by by-passing some of the scripts in these handlers. Is there any way to tell more precisely what is causing the problem? Any recommendations on strategy? Should I just change one stack at a time and look for changes in the error window, or just change all them and wonder what affect that would have on the integrity of the build process?
>> 
>> Also, opencard scripts are also called when a stack in launched and I wonder if those need to be escaped too.
>> 
>> Best,
>> Bill
>> 
>>> On Mar 19, 2021, at 5:46 PM, matthias rebbe via use-livecode <use-livecode at lists.runrev.com> wrote:
>>> 
>>> Another thing. I am not sure if your problems are also a result of the following, but you could giv it a try.
>>> 
>>> There was something changed in Standalonebuilder process starting  in LC 9.0 or so to fix a problem. But this fix could cause other problems in some situation.
>>> While before that fix the main stacks did not receive any openstack and closestack messages during standalone build, now with the fixed standalone builder they do.
>>> Therefore some lines of code need to be added to avoid this.
>>> 
>>> See here on page 2 for an explanation what you have to add to your openstack and closestack handler
>>> https://downloads.livecode.com/livecode/9_0_1/LiveCodeNotes-9_0_1_rc_1.pdf 
>>> 
>>> 
>>> -
>>> Matthias Rebbe
>>> Life Is Too Short For Boring Code
>>> 
>>>> Am 20.03.2021 um 01:31 schrieb ELS Prothero via use-livecode <use-livecode at lists.runrev.com>:
>>>> 
>>>> It’s mystifying that all messages seem to come from the rev builder scripts, with no hint of what could be the problem.
>>> 
>>> _______________________________________________
>>> use-livecode mailing list
>>> use-livecode at lists.runrev.com
>>> Please visit this url to subscribe, unsubscribe and manage your subscription preferences:
>>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> 
>> William Prothero
>> waprothero at gmail.com
>> 
>> 
>> 
>> _______________________________________________
>> use-livecode mailing list
>> use-livecode at lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your subscription preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
> 
> 
> _______________________________________________
> use-livecode mailing list
> use-livecode at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode

William Prothero
waprothero at gmail.com






More information about the use-livecode mailing list