Can anybody HELP !!

camm29 at tesco.net camm29 at tesco.net
Mon Mar 30 12:33:36 EDT 2009


Jim ,

Thanks but I tried that many times and still no good !

I built a stack in Rev 3.0.0 and it will always fail to build ONLY when I use ANSWER Dialog and a PASSWORD for the stack.
It will build with ANSWER Dialog without the a Stack PASSWORD.
It will bulid with Stack PASSWORD without any ANSWER Dialog. 

The same stack wrote with 2.8.1 (not copied) will always build in 2.8.1 using ANSWER Dialog with Stack PASSWORD.

The problem can only be corrected in my case by using Rev's 3.0.0 standaloneSettings.rev stack with the one from 2.8.1.

Regards
Camm

--- Jim Bufalini <jim at visitrieve.com> wrote: 
> Hi Camm,
> 
> Although I figured, from what you said, what the problem was, I did what you asked. Except for downloading a trial version, as this makes no difference. The answer command works fine in a standalone built from a protected stack with 3.0.
> 
> Your issue has nothing to do with 2.8.1 or 3.0 or trial or licensed.
> 
> Here is my guess... ;-) The stack was not protected. You built a standalone in 2.8.1. Then protected it and built again. Everything worked. Then, using another copy of the stack or name or computer, you first protected the stack and then tried to build a standalone in 3.0. Right?
> 
> Because the stack was protected, 3.0 was not able to detect the correct Standalone settings and the EXE didn't have the correct libs included.
> 
> Try these steps: 1. Unprotect the stack. 2. Build a Standalone with 3.0 (Rev will detect the settings and associate it with the name of the Stack). 3 Protect the stack. 4. Build the Standalone again.
> 
> All should be fine. ;-)
> 
> Aloha from Hawaii,
> 
> Jim Bufalini
> 
> 
> 
> > -----Original Message-----
> > From: use-revolution-bounces at lists.runrev.com [mailto:use-revolution-
> > bounces at lists.runrev.com] On Behalf Of camm29 at tesco.net
> > Sent: Monday, March 30, 2009 2:16 AM
> > To: How to use Revolution
> > Subject: Re: Can anybody HELP !!
> > 
> > Just revisting , as I have tried everything now.
> > 
> > I had to use the StandaloneSettings.rev from 2.8.1 and place it into
> > Rev 3.0.0
> > I can then build as password protected stack with an Answer Dialog in
> > Rev 3.0.0
> > Using the StandaloneSettings.rev supplied with Rev 3.0.0 it fails to
> > build.
> > 
> > Can anyone confirm the following a failed build please :-
> > 
> > Download TRIAL version of Rev 3.0.0
> > Write a simple stack using Revs answer dialog that pops up on a press
> > of a button.
> > Build for Windows only and set a password for the stack in the
> > standalone settings.
> > Build the standalone.
> > 
> > Regards
> > Camm
> > 
> > 
> > 
> > 
> > 
> > 
> > ---- Dave <dave at looktowindward.com> wrote:
> > > Hi Camm,
> > > On 4 Feb 2009, at 10:46, <camm29 at tesco.net> <camm29 at tesco.net> wrote:
> > >
> > > > Dave , Jac  and all involved.
> > > >
> > > > Well some progress .....just why ?
> > > >
> > > > Made no difference using revAnswerDailog from 2.8.1 but
> > > > I used revStandalonesettings.rev from 2.8.1 and BINGO !!!!
> > > > Standalone built on Rev 3.0 .......
> > >
> > > Ok, I've got the problem with 2.8.1, so I'm not sure if this actually
> > > solves the problem or it just hasn't happened yet. Maybe it happens
> > > more frequently in 3.0.
> > >
> > > All the Best
> > > Dave
> > >
> > >
> > > _______________________________________________
> > > use-revolution mailing list
> > > use-revolution at lists.runrev.com
> > > Please visit this url to subscribe, unsubscribe and manage your
> > subscription preferences:
> > > http://lists.runrev.com/mailman/listinfo/use-revolution
> > 
> > _______________________________________________
> > use-revolution mailing list
> > use-revolution at lists.runrev.com
> > Please visit this url to subscribe, unsubscribe and manage your
> > subscription preferences:
> > http://lists.runrev.com/mailman/listinfo/use-revolution
> 
> _______________________________________________
> use-revolution mailing list
> use-revolution at lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-revolution




More information about the use-livecode mailing list