Problem with saving standalone

[J. Landman Gay]

On 6/3/05 10:58 AM, Stgoldberg at aol.com wrote:

> I have a stack I'm working on, which when I want to save as a standalone (for 
> either Mac or Windows) comes up with the   message "There was an error saving 
> the standalone application." I can't figure out why, since other stacks save 
> easily as standalones. 

I've been collecting a list of possible causes. Check these things:

1. The path to the stack contains non-ASCII characters, such as 
diacritical marks or accent marks.  Avoid the use of accented or 
non-ASCII characters in path names.

2. The standalone builder is set to search for inclusions but the stack 
is password protected. Select the inclusions manually instead, or remove 
the password.

3. Alternately, the standalone builder may be having trouble searching 
for the required inclusions regardless of password protection. Turn off 
"Search for required inclusions" and turn on "Select inclusions for the 
standalone application." Then choose the resources you need to include 
yourself in the Standalone Settings dialog.

4. The folder name is the same as your standalone's name. You need a 
unique folder name; make sure you select an empty folder with a name 
different from the standalone's name.  If you have previously built a 
standalone from the same stack, do not try to build a new one into the 
same folder. Trying to overwrite an existing standalone with a new one 
can casue problems. Rename or remove the old folder first, and then build.

5. Your source stack's file name does not use an extension, or uses an 
incorrect extension. Make sure your stack's file name ends with the 
extension ".rev"

6. Your source stack contains duplicate "message box" or "ask" or 
"answer" dialogs. Remove the embedded stacks and let the standalone 
builder add them instead. (This usually only occurs with stacks 
originally created in MetaCard.)

Make sure you have done "Check for updates" to be sure you have the most 
recent version of the standalone settings stack.




-- 
Jacqueline Landman Gay         |     jacque at hyperactivesw.com
HyperActive Software           |     http://www.hyperactivesw.com